Madalga Vacuum Jar for Blendtec and Vitamix BlenderDesigned and manufactured in the USA, the Madalga Vacuum Blender Lid is the next step into the future of blender technology. Vacuum blending helps preserve antioxidants and delivers better tasting blends with better colour, less separation and significantly less foam.Madalga vacuum lids are designed and manufactured in the USA.TASTIERTake your home blends to the next level by replacing the frothy, foamy consistency with a smooth, commercial grade blend. By removing the oxidation your blend stays fresh longer and will retain its color. Not only will it taste better but it’s healthier too! HEALTHIERVacuum blending helps preserve vitamins, nutrients, antioxidants, and natural enzymes compared to traditional blending resulting in more nutritional, healthier smoothies, spreads, and sauces.WHY MADALGA?The Madalga vacuum blender lid generates 2x the pressure in HALF the time of other vacuum blenders, works longer between charges, and has a built in fault warning.The lid provides twice the pressure in half the time compared to other high end vacuum blendersPrevents blends from separating into layers Helps preserve vitamins, nutrients, antioxidants & natural enzymesHealthier taste FeaturesEasy to Read Digital OLED Display: Clear display for quick and easy viewing of settings and status.4 Customisable Presets: Personalise your blending settings for optimal results.Cycle Count: Keep track of how many blending cycles have been completed.Battery Indicator: Easily monitor the battery status to ensure your device is always ready for use.Magnetic Locating Wireless Charger: Simply place the charger on the lid, and it will automatically align and start charging. A full charge can last up to 100 blends.Both the charger and the USB-cable are magnetic to ensure liquid ingress protection. The cable is not permanently attached to the charger as this both allows for a better seal on the magnetic charger as well as enables us to use an embroidered cable that is longer lasting than normal USB cables.Visual Guide: Using the Madalga Vacuum LidThis section provides a visual overview of the different stages and functions of the Madalga Vacuum Lid as illustrated in the image.1. Start UpDisplay: The OLED screen shows the initial “VOID” logo when the lid is powered on.Buttons: Use the power button to turn the display on and the “GO” buttons to start the vacuum process.2. Pulling VacuumDisplay: The OLED screen indicates the vacuum process with a pressure indicator.Function: The lid creates a vacuum inside the blender jar, removing air to preserve the quality of the blend. It will stop automatically after a few seconds. You can stop it early at any time. To release the vacuum, simply lift up the red seal.3. Charger IndicatorsIndicator: A red light on the magnetic locating wireless charger indicates that the lid is currently charging, while a blue light signifies that the lid is fully charged.Connection: The magnetic USB cable is connected to the magnetic charger lid and plugged into a USB-charger. We leave no open crevices for water ingress. What’s Included:Madalga Vacuum Lid: Featuring advanced vacuum technology, the lid enhances your blending experience with a sleek, easy-to-use design.Magnetic Locating Wireless Charger: Effortlessly charge your blender lid with this self-aligning wireless charger.Magnetic USB Cable: A convenient cable for charging and connecting your device.Not included: We do not include a USB charger as essentially everyone has one at home and the charger is used so rarely (typically once every few months). You can even charge it from your laptop or computer.DisclaimersDO NOT submerge in waterDO NOT put into dishwasherDO NOT refrigerate or freeze the Madalga lidDO NOT introduce boiling water to Madalga lidsIncluded wireless Chargers are NOT water proofCatch assembly needs to be cleaned with soap and then alcohol after every useIn order to use the Madalga vacuum lid with Blendtec blenders you will need to purchase or already own a Blendtec WildSide or FourSide Jar (These are the standard jars that come with every Blendtec).In order to use the Madalga vacuum lid with a Vitamix blender you must purchase or already own a WildSide Rebel jar (designed by Blendtec) or a Madalga VM2 jar. Both of these aftermarket jars are compatible with most Vitamix blenders (not ascent Series!) as well as with our vacuum lid. The vacuum lid is not compatible with any jars designed or sold by Vitamix.
